argentina 

Tanks

tanqueFor which applications is the tank recommended?

Epoxy bolted tanks with steel frames are particularly specified for storage of both raw and potable water, and other applications in the treatment of effluents or sewage, and even oil products. They can also be used in other applications such as storage of grains, cement, and other solids.

Can the storage capacity be increased?

Yes, the storage capacity can be increased gradually if it was considered this way by the initial design. The capacity increase is based on greater height adding additional rings at the top of the tank.

Can it be transported?

The epoxy bolted thanks are totally removable, which makes possible their transportation.

How long does it take to install a 2.000mtank? And a 10.000mtank?

The installation of a 2000 m³ tank could demand around 30 days, when it comes to a 10,000 m³ tank is feasible to be mounted in 60 days.

What kind of bottom is used and how is the union with it the tank?

Depending on the need, the floor of the tank might be the same material, epoxy resin reinforced with the steel frame or concrete in which case the first ring is embedded in the same concrete slab.

 

See all FAQs.

Contact

  • InternationalThis email address is being protected from spambots. You need JavaScript enabled to view it. | +57(4) 4444242
  • ColombiaThis email address is being protected from spambots. You need JavaScript enabled to view it. | +57(4) 4444242
  • ArgentinaThis email address is being protected from spambots. You need JavaScript enabled to view it. | +54 (351) 4653060
  • BrazilThis email address is being protected from spambots. You need JavaScript enabled to view it. | +55 (11) 9 8584 0753
  • MéxicoThis email address is being protected from spambots. You need JavaScript enabled to view it. | +(52) (555) 557 85 44
  • ChileThis email address is being protected from spambots. You need JavaScript enabled to view it. | +56(2) 240 10 950